The Hydrogeological Field Course is part of Special Modul SM9 "Hydrogeological Methods" of the MSc TropHEE and scheduled for the 2nd semester. This block course complements the Water Analysis Course scheduled for the 1st semester. Water Analysis containes lectures and a practical part with (surface) water sampling, measuring water temperature, EC, pH, oxygen concentration and alkalinity in the field as well ion concentrations in the lab. This practical part of course 3214 is documented in another report and deals with water sampling in more detail. The water sampling part of field course 3417 repeats this topic in this report.
TropHEE Modul Handbook names as goals of this course: "The students are enabled to apply basic field techniques to characterize groundwater levels, groundwater flow fields, and to characterize aquifers in term of hydraulic properties. Students acquire methodical skills to use standard laboratory equipment to analyse water samples and to evaluate the results. Through the hands-on field and laboratory work they gain soft skills such as organizational skills, team working skills, communication skills, and data presentation skills."
Table of Contents
1 Introduction
1.1 General description of Topics
1.2 Participants, locations and dates
1.3 General description of methods and tools
2 Construction of groundwater table map
2.1 Background
2.2 Methodology
2.3 Results
2.4 Discussion
3 Stream discharge measurements
3.1 Background
3.2 Methodology
3.2.1 Float method
3.2.2 Flow meter method
3.2.3 Tracer method
3.3 Results
3.4 Discussion
4 Pumping test
4.1 Background
4.2 Methodology
4.2.1 Methodology for automatic measurements & pumping phase
4.2.2 Methodology for automatic measurements & recovery phase
4.2.3 Methodology for manual measurements & pumping phase
4.2.4 Methodology for manual measurements & recovery phase
4.2.5 Methodology for storativity S
4.3 Results
4.3.1 Results for automatic measurements & pumping phase
4.3.2 Results for automatic measurements & recovery phase
4.3.3 Results for manual measurements & pumping phase
4.3.4 Results for manual measurements & recovery phase
4.4 Discussion
5. Surface- and groundwater sampling
5.1 Background
5.2 Methodology
5.2.1 Multimeter measurements
5.2.2 Titration for alkalinity
5.2.3 Investigations in the lab
5.3 Results
5.3.1 Field results
5.3.2 Lab results
5.4 Discussion
5.4.1 Discussion of field results
5.4.2 Discussion of lab results
6 References
7 Table Of Figures
8 Appendix
8.1 GNU plot program for Topic 1 “Level_b.plt”
8.2 GNU plot Input for Topic 1 'Leveling_d.csv'
8.3 GNU plot program for Topic 1 “Thickness_b.plt”
8.4 Maxima program for Topic 1 “well_a.wxmx”
8.5 GNU plot prog. topic 3 pumping “pump_log.plt”
8.6 GNU plot input topic 3 pumping “PumpLogger0Group1.csv”
8.7 GNU plot input topic 3 pumping “PumpLogger0recov.csv”
8.8 GNU plot progr. topic 3 fitting only “pump_log_fit.plt”
-
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X. -
¡Carge sus propios textos! Gane dinero y un iPhone X.