The purport of this experimentation was to fixate on the analysis of optimum cutting conditions to get the minimum surface roughness in CNC turning of Inconel 718 alloy steel by Taguchi method. The nine experiments were designed by utilizing Minitab17 software. In this research work all the tribulations were conducted at a constant spindle speed (2800 RPM) and in a dry environment.
The results were analyzed utilizing analysis of variance (ANOVA) method. Taguchi method has shown that cutting speed has a consequential role to play in engendering lower surface roughness followed by aliment rate. The vibrations of the implement wear, implement life are the other factors which may contribute poor surface roughness to the results and such factors ignored in analyses.
The results obtained by this research work may be subsidiary for another researcher for further study for other replications such as implement vibration, implement wear, implement life, cutting forces etc.
-
-
-
-
Téléchargez vos propres textes! Gagnez de l'argent et un iPhone X. -
-
Téléchargez vos propres textes! Gagnez de l'argent et un iPhone X. -
-
Téléchargez vos propres textes! Gagnez de l'argent et un iPhone X. -
-
Téléchargez vos propres textes! Gagnez de l'argent et un iPhone X. -
-
Téléchargez vos propres textes! Gagnez de l'argent et un iPhone X.