Engineering Products: Analysing power and control

Essai , 2008 , 14 Pages , Note: 2

Gestion d'entreprise - Direction d'entreprise, Management, Organisation

This essay analyzes how power and control operate at Engineering Products following organizational change. It also critically looks at the implications of this on its managers and employees. The essay argues that it is only a matter of time before managers and employees’ motivation and performance begin to wither and deteriorate due to the firm’s mismanagement of change, power and control.

The case study

Engineering Products

Analysing power and control

Engineering Products is a long-established British engineering firm which for much of the 20th century produced fasteners for industrial clients. The company undertook substantial restructuring in the 1980’s selling off or closing many of its activities so that currently it has three business areas; automotive components, defence and industrial services. These business areas form international product divisions which are the primary axis of internal organisation, linking similar parts of the group across countries. The restructuring also involved expansion overseas to the point that half of the group’s 33,000 employees work abroad; three quarters of these are in Western Europe and most of the remaining quarter in North America.

The largest of the three business areas is automotive components, employing 60% of the group’s workforce. The division is a first-tier supplier, dealing with several of the multinational final producers of cars and is less concentrated in the UK than the company as a whole; only a small proportion of the division’s sales are made in Britain, while an even smaller proportion of the workforce is employed there.

Continental Europe is the base for a much larger proportions of sales and employment, with most of this being in Germany, France and Spain. The case study concentrates on this division of the multinational.

In recent years the pressure from the automotive division’s customers has become a central force in shaping how it manages its international operations in general and its international workforce in particular. The customers themselves have sought to standardise their methods of production and working practices through a process of sharing “best practice” across sites. This has meant that, while the cars sold vary in minor respects between countries, they are produced in increasingly similar ways. One consequence has been that the components they purchase need to be of exactly the same specification in different countries. Since many of the first-tier suppliers in the motor industry are themselves multinational and in many cases supply the same companies in different countries, the effect has been to persuade the components manufacturers to standardise their own operations internationally.

The Standardisation of Production across Borders

The impetus for international integration in Engineering Products, therefore, came from the demands of its customers. Management at the HQ of the division have been faced with the task of integrating what had previously been disparate plants, serving customers in their own country and operating in a largely decentralised way. A key part of forging greater integration was to create management structures at the international level in order to bring together managers from different parts of the group, facilitating the exchange of information between them.

In Engineering Products there are several such structures which serve this function. The division operates “manufacturing councils” which periodically bring together senior manufacturing directors from the plants to examine the processes which are adopted in each of the plants. A different structure fulfilling a similar function is the “International College of Engineering”, located in Germany, at which engineers develop and learn about new manufacturing methods. A further way in which the HQ has sought to drive integration at the international level is though the creation of an international cadre of managers who are expected to spend time on assignments in countries other than their own. One element of this has been the creation of internal consultants; these are managers who have been responsible for pioneering a new practice and who are subsequently given a mission of roaming from plant to plant assisting in the adoption of this practice.

In addition, the HR function has created its own mechanism designed to bring together managers from different sites to share “best practice” and discuss common initiatives. This takes the form of regular meetings of HR specialists from different sites to discuss the implications of integration on personnel practice. These meetings have produced numerous instances of practices which have been standardised as a result, ranging from induction packages for graduates to problem-solving techniques. The evidence from the previous section suggests that, in creating international structures in the HR area, the company is typical of other MNC’s.

It was established in the previous section that the creation of international management structures will rarely be enough on its own to achieve such integration. Plant managers from a multinational that was previously decentralised may not be willing to participate in mechanism which bind them together with plants in other countries if this involves curbs on their autonomy. At Engineering Products, the key way in which the HQ of the division ensured that plant manager engaged in the sharing of best practice was the operation of internal competition for orders. Customer orders for components are increasingly placed at the HQ rather than with each of the plants and HQ then makes decisions about which of their plants will receive the orders. This gives the HQ an important source of leverage over actors at plant level, who are increasingly dependent on the HQ. Decisions as to which plants receive new orders were informed by systematic comparisons of the performance of the plants in terms of costs and quality. A Manager at the HQ described this process in the following way:

Decisions are made at the centre about sourcing to supply different customers so we will decide from which of our factories customers are going to be supplied. In the main, obviously, in the local market the local company supplies the local customer. But to an increasing degree we make decisions about sourcing which can entail moving production from one country to another for a variety of different reasons. Not only in terms of volumes but there is also influence over manufacturing processes to make sure that the world ’ s best practices are adopted across the organisation.

On occasions, the move towards standardising production generated differences of opinion between HQ and plant managers about the merits of a particular initiative. One such example was performance-related pay (PRP); the HQ was anxious to establish the principle of PRP in all of the division’s plants and had been successful in doing so. However, the way it operated varied following discussions with local managers and worker representatives, so that the measures of performance, the proportion of the workforce covered the amount of their pay subject to the performance measure differed between plants. Differences of views were generally resolved through discussions, but at times the HQ was willing to use sanctions to impose its way. One HQ respondent described what happens in cases where managers at plant level refused to accept that a practice favoured by the HQ should be introduced:

Well, if we believed they were wrong we would persuade them and then instruct them and eventually fire the chief executive. We don ’ t get there too quickly but if they are refusing to learn the lessons that are available we take the action that is necessary to bring them into line. This doesn ’ t happen too of ten because we employ very sensible chief executives, but we are directive to that extent.

Internal competition, and the power it gives the HQ, was thus instrumental in the process of international integration in Engineering Products. It induced managers at plant level to participate in the sharing of best practice across sites and to comply with the wishes of HQ in terms of the nature of the production processes and the way in which labour is managed. These developments had a significant impact on the work of both managerial and non-managerial employees.

Implications for Managers and Employees

The central HR function at Engineering Products had unquestionably taken on a more active role following moves towards international integration. A key feature of the function was the creation of structures which facilitated regular contact between managers from different parts of the division, while another feature was the management of international assignments. Taking on these responsibilities represented an opportunity for the HR specialists at the HQ, since it had raised the profile of the function, allowing it to become involved in activities seen as “strategic” rather than just those that were “administrative”.

One tension which the central HR function encountered was the balance between standardising practices and allowing variation between plants to reflect local factors. As we have seen, many elements of personnel practice were been standardised across borders, and the HQ was prepared to use sanctions to ensure that this occurred. However, in other areas, variations in the nature of the law, institutions and national cultures meant that differences in practices persisted. One example was the variations in the way PRP operated; different arrangements reflected the expectations of both plant managers and employees concerning fairness. Another example was employee representation.

In the American plants, there were no formal structures through which employees could be represented; the law did not oblige management to recognise unions and nor were unions influential enough to force management to recognize them. In the European plants, on the other hand, it would have been inconceivable for the company to avoid dealing with unions, given their well-established position in the plants and in some cases the legal support they enjoyed. Clearly, the central HR function had to balance the drive to standardise practice with adapting to local conditions.

For managers, one key implication of the international integration of the activities of the multinational was that progress up the managerial hierarchy was no longer confined to particular countries. The division has moved away from filling senior managerial positions with nationals of the country where the plants are located, towards a geocentric approach in which such positions are filled on merit, with nationality being of little importance. This has meant that there are more opportunities for ambitious managers to progress beyond the plant towards senior position in other countries and at the HQ, which is reflected in the increase in the number of managers working in countries other than their won and in number of overseas nationals in the HQ. While this creates opportunities for progression, it simultaneously imposes obligations on managers to become more geographically mobile. It is now a requirement for senior managers to be willing to spend time on overseas assignments, something that may now suit everyone.

A second implication for managers is that they are increasingly required to comply with the demands of the HQ and, hence, their autonomy is reduced. This was expressed by one manager in the following way:

It ’ s increasingly a strongly coordinated effort from the centre of the division which makes sure that all our operating companies are working together to the same standards making similar products often with the same level of prices.

The result of this is that plant managers have less room for manoeuvre, something that some may resist. However, the existence of international policy-making bodies, such as the manufacturing councils, the International College of Engineering and specific structures in the personnel field such as regular meetings of personnel managers from different sites, means that managers at plant level have an input into the formation of policies and guidelines that operate at the international level.

[...]

• Université: London Metropolitan University
• Note: 2
• Auteur: BA Verena Stickler (Auteur)
• Année de publication: 2008
• Pages: 14
• N° de catalogue: V187392
• ISBN (ebook): 9783656114031
• ISBN (Livre): 9783656113478
• Langue: anglais
• mots-clé: Organisation, Management, Case Study, Analysis, Engineering Products